Combined with appropriate SAW wires such as H08A, H08MnA, H08MnMoA, the flux is widely used in low carbon steels and some low alloy steels applications(16Mn, 15MnV),such as boilers, shipments, pressure vessels, etc. REFMAT Flux SJ501 is also used for multi-wires rapid welding, the speed of which can reach up to about70m/h, so it is especially suitable for double-sided single pass welding.
Mechanical Properties of Deposited metal
Wire | Tensile Strength R m (MPa) | Yield Strength R eh (MPa) | Elongation A % | AKV(J) |
20℃ | 0℃ |
H08A | 415~550 | ≥330 | ≥24 | ≥50 | ≥34 |
H08MnA | 460~630 | ≥360 | ≥24 | ≥50 | ≥34 |
H08MnMoA | 580~680 | ≥450 | ≥20 | ≥50 | ≥34 |
Packaging
OPERATION Remarks
1. Redry the flux at 300~350℃ for 2 hours before welding.
2. Impurities such as rust, greasy dirt, moisture, etc. should be cleared from welding area.